Wall Grab Bar
Results: 121
120 Angle Grab Bar For Wall
Stainless steel straight grab bar, with extension support. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 12 inches long, with 12 inch perpendicular extension.
4-Inch Tile Grip Portable Grab Bar
The 4-Inch Tile Grip Portable Grab Bar is a wall grab bar designed for use by individuals with balance and mobility disabilities. This grab bar features a telescoping handle that extends to adapt to most tile configurations and secures with large suction cups to most clean, smooth, flat surfaces without tools. When the unit is in place, pressing the top and bottom levers down locks the unit in place. Lifting the levers up releases the bar from the wall, allowing it to be removed as needed. DIMEN
800 Series 120 Degree Angle Wall Grab Bar For Toilet (Model 004)
The 800 Series 120 Degree Angle Wall Grab Bar for Toilet ##004 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Both segments of the bar are 12 inches each; mountings are 21 inches apart. Tubing comes in 1, 1.25, or 1.5 inch diameters. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 3 pounds.
800 Series 90 Degree Angle Wall Grab Bar For Toilet (Models 005 & 006)
The 800 Series 90-Degree Angle Wall Grab Bar for Toilet ##005/006 is a stainless steel wall mounted grab bar. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. The bar comes in right (##006) or left (##005) handed configurations. DIMENSIONS: Bar extends vertically 32 inches and horizontally 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polish
800 Series 97 Degree Angle Wall Grab Bar For Toilet (Models 040 & 041)
The 800 Series 97 Degree Angle Wall Grab Bar for Toilet ##040/041 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available with right (##041) or left (##040) handed configurations. DIMENSIONS: Bar extends 32 inches vertically, and 9 inches horizontally with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Fini
800 Series Corner Wall Grab Bar For Toilet (Model 059)
The 800 Series Corner Wall Grab Bar for Toilet ##059 is a stainless steel wall mounted safety bar. The bar consists of two perpendicular sections that extend from the walls 6 inches. This corner bar attaches in three places, two on the side wall and one on the back wall. This grab bar is available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS: 36 x 52 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety G
800 Series Grab Bar For Toilet (Models 001 & 002)
The 800 Series Grab Bar for Toilet ##001/002 is a stainless steel, wall mounted straight bar designed for horizontal attachment next to a toilet. This support attaches to the wall in two places for lengths up to 54 inches (##001), and has a center support mount for lengths over 54 inches (##002). This bar is available with concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Model 001 is available in the following lengths: 12, 16, 18, 24, 30, 32, 36, 42,
800 Series Wall Grab Bar For Toilet (Model 003)
The 800 Series Wall Grab Bar for Toilet ##003 is a stainless steel grab bar that consists of a straight bar with a center post and one end return. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: 48, 52, or 54 inch standard lengths with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 5 to 6 pounds.
90 Degree Grab Bar
The 90 Degree Grab Bar is a wall mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It features vertical and horizontal bars at right angles in either a left- or right-handed configuration. OPTIONS: Slide hook. DIMENSIONS: Vertical and horizontal bars are available in any combination of 12, 16, 24, or 32 inches. COLOR: Available finishes include polished chrome, antique brass, polished brass, polished nickel, satin chrome, satin nickel,
Adjustable Grip Assist (Model 71406)
The Adjustable Grip Assist, model 71406, is a grab bar designed for use to provide balance assistance in the shower or bathtub. This grip has two pivoting handles that swivel to allow positioning for different needs. The grip can be installed and removed by flipping tabs. DIMENSIONS: Handles are 15 inches long.
Anodized Aluminum Grab Bar (Models 6128, 6070, & 6129)
The Anodized Aluminum Grab Bar is a wall-mounted grab bar designed for individuals who need some assistance in maintaining their balance in a given setting. DIMENSIONS: 1 inch in diameter; extends 2 1/2 inches from the wall; length is 12 inches between mounting holes (6128); 18 inches between mounting holes (6070); or 24 inches between mounting holes (6129).
Assist Suction Tub Bar
The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l
Assistive Tub Bar
The Assistive Tub Bar is a bathtub or shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. To install, the bar is positioned vertically, horizontally, or diagonally on the tub or shower wall, then tabs on the bar are flipped down to engage dual suction cups. Releasing the flip-tabs allows the bar to be removed. The bar is made from ABS plastic and rubber. DIMENSIONS (LxW): 16 x 3.5 inches. CAPACITY: 300 pounds.
Barrier-Free Grab Bar (Models Bf-2448 & Gb-1432)
The Barrier-Free Grab Bar is a shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This L-shaped stainless steel grab bar is for use when a shower seat is installed on either side. DIMENSIONS: 14 x 32 inches (model GB-1432) or 24 x 48 inches (model BF-2448).
Barrier-Free Grab Bar (Models Bf-5024 & Bf-5048)
The Barrier-Free Grab Bar is a wall grab bar for shower designed for use by individuals with balance or mobility disabilities. This straight stainless steel grab bar can be used on side walls when a shower seat is installed on the back wall of a shower. DIMENSIONS: Length is 24 inches (model BF-5024) or 48 inches (model BF-5048).
Bath+Safe Swirl Grip Designer Grab Bars (F72460 Series)
Bath+Safe Swirl Grip Designer Grab Bars, F72460 series, are wall grab bars designed for use by individuals with balance and mobility disabilities. These bars have a swirl texture for a non-slip grasp, even when wet. Diamond-shaped mounting brackets conceal the installation screws. Mounting hardware is included. DIMENSIONS: Available in 12, 16, 18, and 24 inches long. All bars are 1.25 inches in diameter and extend 1.5 inches from the wall.
Bathroom Grab Bar (Models 410085, 410086, 410087, 410088, 410090, & 410091)
The Bathroom Grab Bar are wall mounted grab bars designed for use by seniors and individuals with physical disabilities. These bars are made of stainless steel with an exposed screw mount. DIMENSIONS: Length is 9 inches (model 410085), 16 inches (model 410086), 18 inches (model 410090), 24 inches (model 410087), 32 inches (model 410088), or 36 inches (model 410091). Diameter is 1.25 inches (models 410090 and 410091) or 0.88 inches (models 410085, 410086, 410087, 410088, 410090, and 410091). COLO
Bathroom Grab Bars
The Bathroom Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. Available in straight, right angle, or left angle models, these heavy-gauge steel bars provide additional support for sitting, standing, or transferring. Hardware for installation is included. DIMENSIONS: The straight models are available in 12, 16, 18, 24, or 32 inches long. The angled models are 24 x 16 inches. CAPACITY: 250 pounds. COLOR: Chrome or white.
Bci Grab Bars
BCI Grab Bars are wall grab bars designed for use by individuals with balance, mobility, or lower extremity disabilities. These grab bars can be mounted vertically, horizontally, or on an angle. DIMENSIONS: 16 or 24 inches long. COLOR: White, almond, biscuit, or gray.
Boomerang Bar (Model 1220)
The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B
Bridge Medical Pivot Grip Telescoping Portable Grab Bar (Models Bc400M & Bc400L)
The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model
Bridge Medical Telescoping Portable Grab Bar (Model Bc400M)
The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati
Bridge-Medical Single Grip Portable Grab Bar (Model Bc-201)
The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds.
Carex Textured Wall Grab Bars
The Carex Textured Wall Grab Bars is designed for use by individuals with balance disabilities. The device is made of durable heavy duty steel tubing and attractively finished with a diamond-knurled texture. Professional installation is required. Available in different sizes.
Carex White Wall Grab Bars
Carex White Wall Grab Bars are wall grab bars designed for individuals with balance disablities. These grab bars are made of durable heavy duty steel tubing with a powder coat finish. DIMENSIONS: The bars range are available in 12, 16, 18, or 24 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 2.5 inches in length and 2.5 inches in height. COLOR: White.
Centurion Stainless Steel Grab Bars
Stainless steel grab bars. Diameters: 1, 1 1/4, 1 1/3 inches. 1 1/2 inch hand to wall clearance. Oval or round flanges, concealed or exposed mountings. Tested to withstand 1000 pounds of pull when properly installed. Straight: 12, 16, 18, 24, 30, 32, 36, 42, 48 inches.
Chrome Plated Flanged Grab Rail (Model 118)
The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: Chrome.
Combination Aid Rail (Model 1632)
The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st
Corner Grab Bar
Stainless steel corner grab bar with vertical extension on one end. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 48 by 24 by 32 inches high. Right or left.
Deluxe Grab Bar
The Deluxe Grab Bar is a decorative wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. The bar attaches to the wall at two points, with round, square, or diamond-shaped flanges at the points of attachment. DIMENSIONS: 12, 16, 18, 24, 32, or 36 inches long. The round flanges are 3 inches in diameter; the square flanges are 3 x 3 inches, and the diamond-shaped flanges are 4.25 inches. COLOR: Available finishes include antique brass, p
Deluxe Grab Bars (Models H212, H216, H218, H224, H232, H232L, & H232R)
The Deluxe Grab Bars are grab bars designed for use by individuals with balance and mobility disabilities. All models are made of chrome-plated steel. The mounts are coated with soft plastic brushing. Models H232L and H232R are 90- degree angle grab bars and are available with a left or right mounting. DIMENSIONS: Model H212 is 12 x 4.75 inches; model H216 is 16 x 4.75 inches; model H218 is 18 x 4.75 inches; model H224 is 24 x 4.75 inches; model H232 is 32 x 4.75 inches; model H232L is 32 x 4.5
Devon Deluxe Folding Support Rail
The Devon Deluxe Folding Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. DIMENSIONS: The tubing 1.75 inches in diameter and the unit is 30 inches long. COLOR: White.
Devon Rail With Folding Leg
The Devon Rail with Folding Leg is a wall grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plate mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. The folding leg provides additional security and lessens strains on the wall. The height of the rail can be adjusted prior to wall mounting. DIMENSIONS: The rail is 30 inches long. The height adjusts fr
Devon Support Rail
The Devon Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring-loaded cam allows the rail to fold up against the wall when not in use. SIZES: Standard and short. DIMENSIONS: The tubing on both models is one-inch in diameter. The standard model is 30 inches long and the short model is 21.5 inches long. COLOR: White.
Drive Medical Quick Suction Cup Grab Bar Shower Rail
The Drive Medical Quick Suction Cup Grab Bar Shower Rail is designed for individuals with balance or mobility disabilities. The grab bar provides sturdy support and confidence in and around the tub and shower. The easy-to-install and use suction cup grab bar helps prevent dangerous slips and falls to ensure added bathroom safety, and the grip area has a ribbed surface for extra help with grip. This Drive grab bar measures 19.5 inches and fits 4-inch tiles.
Economy Grab Bars (Models H112, H116, H118, H124, H132, H132L & H132R)
The Economy Grab Bars are grab bars designed for use by individuals with balance or mobility disabilities. All models are made of steel with a polyester coating. The mounts are coated with soft plastic brushing. Models H132L and H132R are 90-degree angle grab bars available for right or left mounting. DIMENSIONS: Model H112 is 12 x 4.75 inches; model H116 is 16 x 4.75 inches; model H118 is 18 x 4.75 inches; model H124 is 24 x 4.75 inches; model H132 is 32 x 4.75 inches; model H132L is 32 x 4.5 i
Essential Bath Safety Plus Grab Bar (Models B3212, B3216, B3218, & B3224)
The Essential Bath Safety Plus Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity diisabilities, arthritis, or spinal cord injury. Made of enamel-coated steel, the bars have round mounting plates and include stainless steel mounting hardware. DIMENSIONS: Model B3212 is 12 inches long, model B3216 is 16 inches long, model B3218 is 18 inches long, and model B3224 is 24 inches long. All models are one-inch in diameter and mount 1.5 inches from the
Extend A Hand
Extend A Hand is a wall grab bar designed for use by individuals with balance and mobility disabilities. Suitable for use in tubs and showers, near toilets, in hot tub areas, and more, this bar installs directly to existing wall studs and features a C-shaped horizontal extension for additional leverage and assistance. The extension locks in place with push-button releases. The extension can be left permanently in position or flipped up and out of the way when not in use. DIMENSIONS: 11 x 12, 16
Franklin Brass Ada Grab Bars (Model 5736, 5742, & 5748)
Franklin Brass ADA Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar is made of 18- gauge, type 304 stainless steel tubing with a round flange for concealed mounting. Stainless steel Philips head screws are included. DIMENSIONS: All models have an outside diameter of 1.25 inches with 1.5 inch wall clearance. The bar is available in 12, 16, 18, 24, 30, 36, 42, or 48 inches long. The flange is 3 inches in diameter. CAPACITY: 500 pounds. COL
Franklin Brass Swing Up Bar (Model 5215)
The Franklin Brass Swing Up Bar, model 5215, is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. Made of 18-gauge stainless steel with a knurled gripping surface, this bar swings out from the wall and is curved to provide upper and lower gripping surfaces. It comes with a stainless steel wall retaining clip to secure its upright position. DIMENSIONS: The 1.25-inch diameter bar projects 30 inches off the wall. CAPACITY: 500 pound
Ginger Canterbury Grab Bars
Ginger Canterbury Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, and corner configurations with concealed mounting hardware. OPTIONS: Decorative ring. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Antique nickel, polished brass, polished
Ginger Circa Grab Bars
Ginger Circa Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass. They are available in straight, left or right L-shaped, and corner configurations and come with concealed mounting hardware. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. All lengths and configurations are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, satin nickel
Ginger Hotelier Grab Bars
Ginger Hotelier Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy- gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, or corner configuration, with concealed mounting hardware. DIMENSIONS: Stright grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, or satin nickel.
Grab Bar (Model 3100 K Series Type 02)
Stainless steel grab bar, 48 inches in length or 60 inches. Peened finish for better grip, wall mounted. 1 1/4 inch diameter, 18 gauge stainless steel. Available with concealed or exposed mounting.
Grab Bar - Knurled Chrome (Models 1234A, 1234B, 1234C, 1234D, & 1234E)
The Grab Bar- Knurled Chrome is a wall grab bar designed for use by individuals with balance or mobility disabilities. Made of chrome-plated steel, the bar mounts vertically or horizontally. Knurling around grab bar diameter provides a no-slip grip. DIMENSIONS: Length is 12 inches (model 1234A), 16 inches (model 1234B), 18 inches (model 1234C), 24 inches (model 1234D), or 32 inches (model 1234E). Grip diameter is 1.25 inches. The distance from the wall is 1.5 inches. CAPACITY: 250 pounds. WARRAN
Grab Bar - Powder Coated (Models 1244, 1244A, 1244B, 1244C, 1244D, & 1244G)
The Grab Bar- Powder Coated is a straight, wall-mounted grab bar designed for use by individuals with balance or mobility disabilities. The bar is made of powder-coated steel tubing with large 3-hole welded flanges, and can be mounted vertically or horizontally. DIMENSIONS: Length is 12 inches (model 1244), 16 inches (model 1244A), 18 inches (model 1244B), 24 inches (model 1244C), 32 inches (model 1244D), or 36 inches (model 1244G). Tubing is 1 inch in diameter; the frame is 2.5 inches in diamet
Grab Bar For Wall
Stainless steel grab bar for tub wall. 8 inch extensions for support on each end. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 36 inches long.
Grab Bar For Wall
Stainless steel corner grab bar for tub wall. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. 8 inch extension for support. Exposed or concealed mount. 34 inches long. Satin finish. Left or right.
Grab Bar For Wall.
Grab bars, outside diameter 1 1/4 to 1 1/2 inches, meets 250 pound stress load, does not rotate in fittings, optional concealed or exposed mounting, smooth safety guard finish. Lengths: straight 24, 36, 42 inches or two different models at 48 inches long. Also l shaped, 36 by 36 inches long.
Grab Bar Series
Wall mounted stainless steel grab bars. Standard and custom styles available.
Grab Bars
DO IT YOURSELF ENTRYPURPOSE: To aid in selecting and installing grab bars for use by individuals with balance, mobility, or lower extremity disabilities. This article, part of a chapter entitled "Bathroom & Washing Up," discusses fit and placement, materials, weight support, and installation of grab bars. AUTHOR: Greenstein, D. TITLE: Grab Bars. BOOK: Easy Things to Make to Make Things Easy: Simple Do-It-Yourself Home Modifications for Older People & Others with Physical Limitations. REF
Great Grabz Horizon Grab Bars
Great Grabz Horizon Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bars are designed to be stylish for residential use. DIMENSIONS: 10, 24, 36, or 42 inches long. Distance from wall to bar is 2.5 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.
Great Grabz Splash Peak Grab Bar
The Great Grabz Splash Peak Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern design that rises to a peak, making one end higher than the other; concealed mounting; and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 24 or 36 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inch
Great Grabz Splash Plateau Grab Bar
The Great Grabz Splash Plateau Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern linear design, concealed mounting, and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 12, 24, 36, or 48 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. COLOR: Stainless, polished stainless
Great Grabz Wave Grab Bars
Great Grabz Wave Grab Bars are wall grab bars designed for residential use by individuals with balance or mobility disabilities. The bar has a decorative wave shape. DIMENSIONS: Length is 24 or 36 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.
Groovy Grip Grab Bar (Models H724580016, H724580018, & H724580024)
The Groovy Grip Grab Bar is a wall grab bar for bathroom, designed for use by individuals with balance or mobility disabilities. This wall-mounted plastic grab bar has grooved surfaces to provide a non-slip grasp, even when wet. Mounting brackets conceal the installation screws. Hardware and detailed installation instructions are included. DIMENSIONS: 1.5 inches in diameter. The distance from wall to bar is 2 inches. Availabe lengths are 16 inches (model H724580016), 18 inches (model H724580018)
Hafele Hewi Lifesystem Hinged Support Rail
The Hafele HEWI LifeSystem Hinged Support Rail is a wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This rail is made of a smooth, non-porous nylon, resistant to cosmetic staining and disinfectants. This single-arm rail lifts up and out of the way when not in use and has a non-slip ergonomic-shaped polyurethane grip for supporting, steadying, and pulling oneself up. The rail is made of epoxy-coated, mat aluminum with chrome plated accents. M
Handi-Grip Portable Grab Bars
Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and
Handicap Bar
Stainless steel grab bar, satin finish, straight, 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 18, 24, 36, 42, 48, 52 inches. Available with non slip peened surface.
Handicap Corner Bar
Stainless steel grab bar, satin finish, straight bar with one straight end and one curved end to attach at corner of wall. 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 24, 30, 36, 42, 48, 52 inches. Available with peened non slip surface.
HandiRail Bed Assist Rail
The HandiRail Bed Assist Rail is designed for use by individuals with balance or mobility disabilities. The handrail is a support to help in and out of bed while preventing falls and injuries and eases the burden of the caregiver. It is for use with mattresses and box spring type bed. Its easily adjustable handle adjusts with one-inch increment.
HandiRail Half Bed Assist Rail
The HandiRail Half Bed Assist Rail is designed for use by individuals with balance or mobility disabilities. The handrail is designed with two straps which attach to the opposite side of the bed from where the rail is being used. It detaches easily from the rail without having to lift the mattress. For use with mattress and box spring type beds.
Handrail (Models Rt130, Rt131, Rt136, & Rt138)
The Handrail is a shower wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. All models include a vertical bar and an angled horizontal bar, and are designed to be installed in the corner of a shower stall. COLORS: White, red, dark blue, gray, or turquoise.
Healthsmart Suction Cup Grab With Bactix
The HEALTHSMART Suction Cup Grab Bar with BactiX is designed for use by individuals with balance, mobility, or lower extremity disabilities. It offers short-term balance assistance and will suction onto any non-porous surface, such as a shower wall. Grab bars are used as a temporary of additional support when entering or exiting the shower or tub. The HEALTHSMART Suction Cup Grab Bar is infused with BactiX™ antimicrobial protection. BactiX acts as a shield against germs, odors, stains, molds,
Heavy-Duty Plastic Fluted Grab Bars
The Heavy-Duty Plastic Fluted Grab Bars are grab bars designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. These bariatric grab bars are reinforced with an aluminum tubular core for greater strength. The plastic fluted surface provides additional grip and provides assistance in preventing accidental slipping. DIMENSIONS: 12, 16, 18, 24, or 32 inches long x 1.25 inches in diameter. CAPACITY: 385 pounds. COLOR: White or blue.
Hockey Stick Bar (Model 832)
The Hockey Stick ##832 is a stainless steel wall mounted grab bar that can be used in bathtubs and showers, or next to toilets. The support is shaped in the form of a hockey stick with a longer vertical bar and a shorter horizontal bar that attaches to the wall in two places at the ends. The bar is bent at 97 degrees to create these two sides. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 8 inches with 1, 1.25, or 1.5
Horizontal Shower Bar With Vertical Arm (Model 2424-V)
The Horizontal Shower Bar with Vertical Arm ##2424-V is a stainless steel wall mounted grab bar. The support consists of a horizontal bar with an L- shape to fit the corner of the shower and a vertical bar for additional hold when entering or exiting the shower. The bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 24 x 24 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is standard; optional finishes includ
Horizontal Tub Bar With Vertical Arm (Model 2040-V/vm)
The Horizontal Tub Bar with Vertical Arm is a stainless steel wall mounted grab bar for bathtubs. The support consists of a horizontal bar with an L- shape to fit to the corner of the side and back walls of the tub, and a vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 40 x 20 x 32 inches (##2040- V) or 24 x 48 x 32 (##2040-VM with center mounting) w
Inclined Aid Rail (Model 2245)
The Inclined Aid Rail ##2245 is a stainless steel wall mounted grab bar for use in bathtubs and showers, or by toilets. This support is a straight bar that attaches to the wall at both ends. It is available with 4 concealed or 4 exposed mountings, and, when diamond shaped mountings are ordered, is available in right or left hand configurations. When mounted at a 45 degree angle with 22 5/8 inch centerline, this bar is designed to exactly hit building studs 16 inches apart. DIMENSIONS: 22 5/8 inc
Inside Corner Grab Bar
Stainless steel corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 20 by 40 inches.
Invacare Knurled Chrome Grab Bar (Models 512-3, 516-3, 518-3, 524-3. & 532-3)
The Invacare Knurled Chrome Grab Bar is a bathroom wall grab bar designed for use by individuals with balance or mobility disabilities. This grab bar is made of chrome-plated steel with a knurled surface. It mounts at a variety of angles to a wall's structural supports. Rubber gaskets protect the wall surface. DIMENSIONS: 1 inch diameter with length of 12 inches (model 512-3), 16 inches (model 516-3), 18 inches (model 518-3), 24 inches (model 524-3), or 32 inches (model 532-3). Wall clearance is
Invacare White Grab Bar (Models 312-3, 316-3, 318-3, 324-3, & 332-3)
The Invacare White Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities in bathrooms. The grab bar is made of steel with a vinyl coating. DIMENSIONS: 1 inch diameter with length of 12 inches (model 312-3), 16 inches (model 316-3), 18 inches (model 318-3), 24 inches (model 324-3), or 32 inches (model 332-3). Wall clearance is 3.75 inches. CAPACITY: 250 pounds. WEIGHT: 1 pound (312-3), 1 pound 4 ounces (316-3), 1 pound 8 ounces (318-3), 1 pound 12 ounce
Inverted T Grab Bar
The Inverted T Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It has one vertical bar perpendicular to a horizontal bar. The bars attach to the wall at four points. OPTIONS: Slide hook. DIMENSIONS (HxW): 24 x 32 or 32 x 24 inches. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oil-rub
Invisia Accent Bar
The Invisia Accent Bar is a decorative grab bar, that allows one to disguise its purpose. The bar can hold up to 500 pounds and can be installed vertically, horizontally, or angled. Choose from chrome, bronze or stainless steel.
Invisia Towel Bar With Integrated Safety Rail / Grab Bar
The Invisia Towel Bar with Integrated Grab Bar/Safety Rail is a towel bar with grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of stainless steel, this unit comprises a towel bar suspended below a curved grab bar. For maximum support, these bars have three points of contact with the wall. DIMENSIONS: 16 or 24 inches long. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.
Kurled Grab Bars
Kurled Grab Bars, model 22120, are wall grab bars designed for use by individuals with balance or mobility disabilities. Grab bars have a kurled finish and are made of heavy-wall chrome-plated steel tubing. Mounting hardware is included. DIMENSIONS: Available lengths are 12, 16, 18, 24, or 32 inches. Diameter is 1 inch.
Liberty Assist Grab Bars (500 Series)
Liberty Assist Grab Bars, 500 series, are grab bars designed for use by individuals with balance or mobility disabilities. Bars are straight and made of chrome plated brass, polished brass, or polished stainless steel. DIMENSIONS: 9, 12, 16, 18, 24, 30, 32, or 36 inches long. COLOR: Brass, chrome, stainless steel, or white.
Lumex Chrome Grab Bars (Models 2012A, 2016A, 2018A, 2019A & 2021A)
Lumex Chrome Grab Bars, models 2012A, 2016A, 2018A, 2019A and 2021A, are wall mounted grab bars designed for use by individuals with balance or mobility disabilities. Made of durable chrome plated steel with knurling to provide a good gripping surface, the bars can be mounted vertically, horizontally, or diagonally 1.5 inches from the wall. The bars are straight. DIMENSIONS: Length is 12 inches (2012A), 16 inches (2016A), 18 inches (2018A), 24 inches (2019A), or 32 inches (2021A). CAPACITY: 250
Lumex Versaguard Coated Grab Bars (Models 40033A, 40133A, 40233A & 40333A)
The Lumex VersaGuard Coated Grab Bar, models 40033A, 40133A, 40233A and 40333A, is a wall-mounted grab bar designed for use in showers and bathtubs to assist persons with balance or mobility disabilities. This straight bar is made from heavy duty steel with a rust resistant enamel coating. The bars can be mounted vertically, horizontally or diagonally, and when mounted, is 1.5 inches from the wall. DIMENSIONS: 12, 16, 18, 24 or 32 inches. CAPACITY: 250 pounds. WARRANTY: Lifetime limited warranty
Moen Designer Elegance Securemount Grab Bar
Moen Designer Elegance SecureMount Grab Bars are wall grab bars designed for use by individuals with balance, lower extremity, neurological, or mobility disabilities or arthritis. The patented SecureMount system allows these grab bars to be installed in wall studs at any angle, and using the optional SecureMount Anchors allows the bars to be installed anywhere on the wall without using the studs. These stainless steel bars have concealed screws and grip pads for added security. OPTIONS: Pair of
Moen L-Shape Peened Grab Bar (Models 8992, 8994, & 8996)
The Moen L-Shape Peened Grab Bar, models 8992, 8994 and 8996, is a grab bar designed for use by individuals with balance or mobility disabilities. The finish is peened to improve grip. The rods are formed from 18-gauge, type 304 stainless steel tubing with a satin finish. It has a concealed screw mounting. DIMENSIONS (LxD): 16 x 32 inches (8992); 24 x 36 inches (8994); or 24 x 48 inches (8996). Diameter is 1.5 inches. CAPACITY: 500 pounds. WARRANTY: Limited lifetime warranty.
Moen Suction Balance Assist Bar
The Moen Suction Balance Assist Bar is a wall grab bar designed for use by individuals with balance disabilities. This portable bar has a non-slip grip and attaches to smooth, flat surfaces with the large suction cup at each end. Locking mechanisms secure the bar to the wall once placed with the suction cups. Releasing the locks releases the bar from the wall. DIMENSIONS: 12 inches long. COLOR: Cool white.
Multi-Level Hand Grip (Model F72481)
The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248
Newel Handrail
The Newel Handrail is a handrail designed for use alongside stairs by individuals with balance or lower extremity disabilities or arthritis. This handrail is designed specifically for indoor use and eliminates the need to release the handgrip at the top ot bottom stair. Available or left- or right-side use, these rails are made of tubular steel, treated with rust inhibitor, and coated with polyester epoxy resin powder coating. DIMENSIONS: 27.75 inches l0ng x 1.25 inches in diameter. CAPACITY: 27
Non-Peel Flanged Grab Rail (Model 117)
The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.
Non-Peel Flat End Grab Rail (Model 115)
The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. DIMENSIONS: Available in 18, 24, or 28 inches long with a 2-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.
Non-Peel Offset Grab Rail (Model 114)
The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. This steel grab bar is angled at 45 degrees and is designed for applications where hand access is difficult such as door jambs. DIMENSIONS: Available in 18 or 28 inches long with a 2-inch hand clearance. COLOR: White plastic non-peel coating.
Off-The-Pot
Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in
Outside Corner Grab Bar
Stainless steel outside corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mount. Satin finish. 34 by 18 1/2 inches.
Ponte Giulio Trendy Grab Bar
The Ponte Giulio Trendy Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These aluminum bars have a non-slip ABS plastic coating that gives the bar the appearance of wenge wood. The concealed mounting flange has an eleven-hole design for a variety of mounting options. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 16, 18,24, or 36 inches long. These bars are 1.25 inches in diameter and the d
Reeded Grab Bar
The Reeded Grab Bar is a ridged wall-mounted grab bar disigned for use by individuals with balance or mobility disabilities or spinal cord injury. These bars have ridges to aid in grasping, and attach to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLORS: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin go
Ribbed Grab Bar
The Ribbed Grab Bar is a wall grab bar designed for use in the bathtub or shower by individuals with balance or mobility disabilities. Constructed of durable ribbed plastic for a non-slip grip, the unit consists of a center bar, two end brackets with closure plugs, and mounting screws. The end caps can be removed to enable additional lengths to be added in a continuous straight line. DIMENSIONS: Available in 16 inches long to accommodate standard wall stud spacing or in 24 inches long. The wall
Right / Left Reversible Handrail (Models Rt124, Rt126, & Rt128)
The Right/Left Reversible Handrail is a wall grab bar designed for use in bathrooms by individuals with balance, lower extremity, or mobility disabilities. The hand rail has veritcal and horizontal bars, and is right/left reversible. DIMENSIONS (HxW): 762 x 475 millimeters (model RT124); 762 x 762 millimeters (model RT126); or 762 x 1200 millimeters (model RT128). COLORS: White, red, dark blue, gray, or turquoise.
Rohl Decorative Grab Bar (Models 1250 & 1252)
The Rohl Decorative Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. These solid brass grab bars have a country bath escutcheon design. Mounting hardware is included. DIMENSIONS: Model 1250 is 38.56 inches long with a center length of 36 inches. Model 1252 is 20.53 inches long with a center length of 18 inches. Both models extend 3.75 inches from the wall and have an escutcheon diameter of 2.56 inches. COLOR: Polished chrome, polished nickel, sat
Safe-er-Grip Swivel
The Safe-er-Grip Swivel is designed for users with balance or upper extremity disabilities to use in and around the tub. The grip bar can be position in different angles as required. To use, press the tab levers to securely attach.
Smooth Grab Bar
The Smooth Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It attaches to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oi
Stainless Steel Grab Bars (Models Gb-11224C, Gb-11230C, Gb-11236C, Gb-11242C, Gb-11248C, Gb-11412C, Gb-11416C, Gb-11418C, Gb-11424C, Gb-11430C, Gb-11436C, Gb-11442C, & Gb-11448C)
Stainless Steel Grab Bars are designed for use by individuals with balance or mobility disabilities. Each grab bar comes with six stainless steel screws. DIMENSIONS (diameter x length): 1.5 x 24 inches (model GB-11224C), 1.5 x 30 inches (model GB-11230C), 1.5 x 36 inches (model GB-11236C), 1.5 x 42 inches (model GB-11242C), 1.5 x 48 inches (model GB-11248C), 1.25 x 12 inches (model GB-11412C), 1.25 x 16 inches (model GB-11416C), 1.25 x 18 inches (model GB-11418C), 1.25 x 24 inches (model GB-1142
Stander Curve Grab Bar
The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta
Straight Grab Bar
The Straight Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disaabilities, arthritis, or spinal cord injury. These grab bars are made of stainless steel tubing, with concealed-screw mounting flanges heliarc welded to the bar to form a single structural unit. This grab bar is available in various lengths. DIMENSIONS: Tubing has an outer diameter of 1.25 or 1.5 inches with a wall thickness of 0.05 inches. Flanges are 3 inches in diameter. The bar is available
Straight Grab Bar (Model B-5806)
The Straight Grab Bar, model B-5806, is a wall grab bar designed for use by people with balance, lower extremity and mobility disabilities. This straight grab bar is constructed of type 304 stainless steel 18-gauge tubing with a satin finish. It has a concealed mounting flange with a stainless steel plate and screw holes for concealed anchors. A stainless steel cover snaps over the mounting flange to conceal the screws. DIMENSIONS: Available in lengths of 18, 24, 30, 36, 40, 44 and 48 inches. Th
Suction Grab Bar, Adjustable Length
The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release leve
Suction Grab Bar, Fixed Length
The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups
Telescoping Grab Bar
The Telescoping Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. This safety grab bar can be mounted in any direction on any smooth non-porous surface without damage to walls. The suction cups can provide up to 130 pounds of pull strength. SIZES: Large, medium, or small. DIMENSIONS: The length range is 26 to 31 inches (large), 22 to 27 inches (medium), or 17 to 23 inches (small), with a hand holding area of up to 21 inches (large), 17 inches (med
Textured Insulated Grab Rails
Textured Insulated Grab Rails are wall grab bars designed for use in the bathroom by individuals with mobility or balance disabilities. These textured plastic bars feature covers to hide the mounting hardware (mounting hardware not included). DIMENSIONS: All models extend 2 inches from the wall and are 1.5 inches in diameter. These grab bars are available in a choice of 12, 15, 16, 18, 24, or 36 inches long (each sold separately). COLOR: White.
Textured Wall Grab Bars
Textured Wall Grab Bars are wall grab bars designed for use by individuals with balance disablities. The bars have a diamond-knurled textured gripping area. DIMENSIONS: The bars are available in 12, 16, 18, 24, or 32 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 3.5 inches in length and 3.75 inches in height.
The Curve Grab Bar
The Curve Grab Bar is an assistive technology product designed for those individuals with ataxia and balance disabilities to help them increase bathroom safety and mobility while boosting their independence. Easy to install, it offers the stability users need to go from sitting to standing in the restroom. Protects against falls and makes standing or sitting easy. Can be pivoted to the position most convenient for the user. Horizontal Bar provides extra stability. Space saving design that pivots
Triple Chrome Plated Steel Grab Bars - Adjustable Flange
Triple Chrome Plated Steel Grab Bars - Adjustable Flange are wall grab bars designed for use by individuals with balance or mobility disabilities. The adjustable diamond flange allows increased wall stand-off. The bar's diamond knurl finish can be gripped even when wet, and the triple chrome plating is rust resistant. The bar comes with mounting screws. OPTIONS: Available in some lengths with a second bar set at 45- or 90-degree angle on left or right. DIMENSIONS: Straight bar is 12, 16, 18, 24,
Triple Chrome Plated Steel Grab Bars - Fixed Flange
Triple Chrome Plated Steel Grab Bars - Fixed Flange are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar has a diamond knurl finish for gripping even when wet. The triple chrome plated finish is rust resistant. The bar comes with mounting screws. OPTIONS: Available in some lengths with second bar set at a 45- or 90-degree angle on the left or right. DIMENSIONS: Straight bar is 12, 16, 18, 24, or 32 inches long; the 45-degree bar is 12 x 12 inches; the
Tub / Shower Bar (Model 3636-V)
The Tub/Shower Bar ##3636-V is a stainless steel wall mounted grab bar for showers and bathtubs. The support consists of an L-shaped horizontal bar that provides a grab surface on the back and side walls, and a connected vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 36 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Sati
Tub Modifications
DO IT YOPURSELF ENTRYPURPOSE: To make bathing safer and more accessible for individuals with mobility disabilities and seniors. This section of a chapter entitled "Bathroom and Washing Up" provides a selection of suggestions for simple ways to make bathtub use safer and more accessible. Included are discussions about installing a hand-held showerhead and grab bars, purchasing and using a bath or shower bench or chair, ensuring sufficient lighting, installing anti-scalding devices, and adapting s
Two Wall Shower / Tub Compartment Grab Bar (Models B-68616 & B-68616.99)
The Two-Wall Shower/Tub Compartment Grab Bar, models B-68616 and B-68616.99, is a wall mounted grab bar for use with a bathtub or shower. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68616.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for concealed anchors.
Two Wall Tub / Shower Toilet Compartment Grab Bar (Models B-68137 & B-68137.99)
The Two-Wall Tub/Shower Toilet Compartment Grab Bar, models B-68137 and B-68137.99, is a wall mounted grab bar for use with a bathtub, shower or toilet. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68137.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for con
Ultra Grip Bath Suction Handle (Model B200-00)
The Ultra Grip Bath Suction Handle, model B200-00, is a portable grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar has a visual activation indicator that shows when it is in place and properly adhered to a smooth flat surface. It has a support handle with dual locking suction cups and safety indicators. The suction grips hold tightly to any smoother, flat and non-porous surface. The unit can be used for travel or short-term situations. The indic
Vertical Grab Bar
Stainless steel 90 degree angle grab bar. 1, 1 1/4, or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount, 16 by 32 inches high. Right or left.
Wall Mounted Handgrips
The Wall Mounted Handgrips are wall grab bars designed for use by individuals with balance or mobility disabilities. These grab bars are shaped like wide V's and can be installed vertically above bathtubs, in showers, and near toilets. Available in a single and double grip model, the units have a grooved inner surface for a secure grasp. Installation hardware and instructions are included. DIMENSIONS: The single model is 9.5 inches long and the double model is 17.25 inches long.
Wall Mounted Steel Grab Bars
The Wall Mounted Steel Grab Bars are wall grab bars designed to provide individuals with extra support in keeping their balance. The bars are made of polished steel and are appropriate for either vertical or horizontal positions. The bars come with brackets and chrome-plated screws and have be safety tested to 300 pounds. OPTIONS: Straight or 90 degree angle bars available. DIMENSIONS: 7/8 inch diameter; 1 1/2 inches from the wall; straight: 12, 16, 24, 32, 40 or 48 inches long. Angle: 16 x 16,
Wall Mounted Tub Rail (Model 2040)
The Wall Mounted Tub Rail ##2040 is a stainless steel grab bar for use in bathtubs. The support consists of an L-shaped bar designed for mounting in the corner of the walls of the tub area. This rail is available in 4 concealed and 4 exposed mounting styles, and can be mounted for either right or left handed use. DIMENSIONS: 36 x 48 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety clearance is 1.5 inches. FINISH: Standard finish is Brushed Satin; optional finishes include non-slip safety
Wall Suspended Tub Rail (Model 1236)
The Wall Suspended Tub Rail ##1236 is a stainless steel wall mounted grab bar for bathtubs. The support consists of a U-shaped bar with 2 mounting points, and 2 L-shaped extension arms that are attached to the underside of the hand bar and mount to the wall. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 36, 40, 42, or 48 inch crosspieces; hand bar extends from wall 12 inches; extension arms are 8 x 12 inches. FINISH: Brushed Satin is standard; optional finis
Wavegrip Grab Rail System
Wavegrip Grab Rails are wall grab bars for installation in bathrooms and other areas where additional support is needed for persons with disabilities, children, or seniors. The grab bars are available in straight or bent (45- or 90-degrees) models. The bars feature a continuous "wave" pattern ergonomically designed to fit the contours of the hand. The tubing is made of aluminum and plastics that are permanently bonded to one another and finished with a polyamide surface finish. All parts are eas
Wavegrip Grip Pieces
The Wavegrip Grip Pieces are wall grab bars for use in bathrooms around the toilet, in the tub or shower, or in other areas where secure support may be needed for persons with disabilities, seniors, or children. The grip pieces are modular units that may be combined to fit any room, including interior and exterior corners. Different configurations and lengths of handrails may be designed with two models: straight pieces for extension, and open-ended pieces with one wall mount. The tubing feature
Wavegrip Support Grips
The Wavegrip Support Grips are wall grab bars for use in the bathroom or other areas where support is needed for persons with disabilities or seniors to have a secure hand hold. The U-shaped grips are available in a rigid or folding version. For the swivel mechanism of the folding version, an adjustable brake prevents unwanted folding down of the unit in all positions. The ergonomically designed tubing has a continuous "wave" pattern that fits the contours of the hands. The supports are made of